MPEG Toolkit

home *** CD-ROM | disk | FTP | other *** search

/ MPEG Toolkit / MPEG Toolkit.iso / dos / display / drvsrc / ati_16md.asm < prev next >

Wrap

Assembly Source File | 1997-01-01 | 15.7 KB | 578 lines

;-------------------------------------------------------------------------- ; This is file ATI_16M.ASM, Version 0.3 ; ; Copyright (C) 1991 DJ Delorie, 24 Kirsten Ave, Rochester NH 03867-2954 ; Copyright (C) 1992 Csaba Biegl, 820 Stirrup Dr, Nashville, TN 37221 ; Copyright (C) 1994 Bernhard Schwall (ATI-parts) ; ; This file is distributed under the terms listed in the document ; "copying.dj", available from DJ Delorie at the address above. ; A copy of "copying.dj" should accompany this file; if not, a copy ; should be available from where this file was obtained. This file ; may not be distributed without a verbatim copy of "copying.dj". ; ; This file is distributed WITHOUT ANY WARRANTY; without even the implied ; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ;-------------------------------------------------------------------------- ; ; changes: ; ; Version 0.1: 07.02.1994 ; first release ; ; Version 0.2: 09.02.1994 ; fixed the byte/line to really needed size, so 640x480x16.7mio ; will fit in 1MB-Ram ; clear 2.MB when using 16.7mio. colormode ; ; Version 0.3: 16.02.1994 ; return the right number of planes ; changed 24 bit mode to BGR-order ; so disp160 will run in truecolor ; ; Version 0.31: 31.03.1994 ; set screenwidth to original value when switching to textmode ; changed the standard setup: disable memory aperture ; changed grdriver.inc to new verson shipped with LIBGRX 1.03 which ; now uses disp180 too. ; ;-------------------------------------------------------------------------- include grdriver.inc cseg segment byte public 'code' assume cs:cseg, ds:cseg, es:cseg, ss:nothing ;-------------------------------------------------------------------------- ; DRIVER HEADER ; The following entries MUST match the structure and constant ; declarations in the file 'grdriver.h' of the GRX graphics library ; The mode word should contain the following bitfields: ; - the GRD_NEW_DRIVER bit set for any new format driver ; - the adapter type field should be specified ; - the memory size field should be specified ; - the paging mode field should be specified ; The mode set routine will OR in the plane bitfield as it will ; change when different color number modes are requested. ;-------------------------------------------------------------------------- dw offset mode_set_routine dw offset paging_routine mode_W dw GRD_NEW_DRIVER+GRD_VGA+GRD_1024K+GRD_RW_64K ; ; The 'def_xx' fields are filled in by go32 from the corresponding ; fields of the 'GO32' environment variable ; def_tw dw 80 ; text width def_th dw 25 ; text height def_gw dw 640 ; graphics width def_gh dw 480 ; graphics height def_nc dw 16 ; graphics colors dw offset driver_init_routine dw offset text_mode_table dw offset graphics_mode_table ; ; Biggest text and graphics sizes ; Max_TW equ 80 Max_TH equ 50 Max_GWn equ 800 ; non interlaced!!! Max_GHn equ 600 Max_GW equ 1024 ; may be interlaced Max_GH equ 768 ;-------------------------------------------------------------------------- ; TABLE OF SUPPORTED TEXT MODES ; - keep sorted by size ; - end with an all 0 entry ; - BIOS field = 0xff disables it ; - fields: ; width, height, colors, BIOS#+ setup_procedure_index*256 ;-------------------------------------------------------------------------- text_mode_table label word dw 80, 25, 2, 007h + 00000h dw 40, 25, 16, 001h + 00000h dw 80, 25, 16, 003h + 00000h dw 80, 28, 16, 003h + 00100h dw 80, 50, 16, 003h + 00200h dw 132, 25, 16, 023h + 00000h dw 132, 28, 16, 023h + 00100h dw 132, 44, 16, 033h + 00000h dw 0, 0, 0, 000h + 00000h ;-------------------------------------------------------------------------- ; TABLE OF SUPPORTED GRAPHICS MODES ; - keep sorted first by colors then by size ; - end with an all 0 entry ; - BIOS field = 0xff disables it ; - fields: ; width, height, colors, BIOS#+ setup_procedure_index*256 ;-------------------------------------------------------------------------- graphics_mode_table label word dw 320, 200, 16, 00dh + 00000h dw 640, 200, 16, 00eh + 00000h dw 640, 350, 16, 010h + 00000h dw 640, 480, 16, 012h + 00000h dw 800, 600, 16, 054h + 00000h dw 1024, 768, 16, 055h + 00000h dw 320, 200, 256, 013h + 00000h dw 640, 400, 256, 061h + 00000h dw 640, 480, 256, 062h + 00000h dw 800, 600, 256, 063h + 00000h dw 1024, 768, 256, 064h + 00000h dw 640, 480, 32768, 062h + 00300h dw 800, 600, 32768, 063h + 00300h dw 1024, 768, 32768, 064h + 00300h dw 640, 480, 49168, 062h + 00310h ; 49168 = 0xc000+16 dw 800, 600, 49168, 063h + 00310h dw 1024, 768, 49168, 064h + 00310h dw 640, 480, 49176, 062h + 00380h ; 49176 = 0xc000+24 dw 800, 600, 49176, 063h + 00380h dw 0, 0, 0, 000h + 00000h ;-------------------------------------------------------------------------- ; TABLE OF SPECIAL SETUP PROCEDURES ; You may need such procedures for: ; -- reloading fonts on standard EGA or VGA for ; higher resolution text modes ; -- enable HiColor mode of some Super VGAs ; -- Handle the parameter passing conventions of the VESA BIOS ; -- put VGA into 256 color plane mode ("MODE X") ; -- etc... ; There should be one entry in the table for every non-zero ; 'setup_procedure_index' in the text and graphics mode tables. ; The first entry in the table belongs to index 100h, and so on. ; The special setup procedure is invoked via a near call. ; ; Entry: DI=address of the mode record from the text or graphics ; table to set up. ; ; Exit: Adapter configured ; BX=driver mode word as it should be returned by the mode set ; routine. Typically it involves picking up the mode word ; from the header and OR-ing in the appropriate bitplane mode ; bitfield. (This is not needed for text modes) ; AX, SI can be trashed, PRESERVE DI!!!! ; ; NOTE: This runs in real mode, but don't mess with the segment registers. ;-------------------------------------------------------------------------- special_setup_table label word dw offset VGA_28row_mode_set dw offset VGA_50row_mode_set dw offset ATI_setup ; setup 15, 16 and 24 bit ; ; Routine to set up VGA 50 row mode ; interface is described above ; VGA_50row_mode_set proc near mov ax,03h ; set 80x25 mode int 10h xor bx,bx mov ax,1112h ; load 8x8 font int 10h ret VGA_50row_mode_set endp VGA_28row_mode_set proc near mov ax,WORD PTR [di+6] ; set 25 line mode xor ah,ah int 10h xor bx,bx mov ax,1111h ; load 8x14 font int 10h ret VGA_28row_mode_set endp ; Routine to initialize 16.7milion color mode on ATI GU+ GUpro ATI_Accell db 0 ATI_lo dw 0 ATI_hi dw 0 ATI_setup proc near mov ax,word ptr [di+6] and ax,006fh int 10h ; switch to graphicsmode mov cx,ax and ax,006fh cmp ax,63h jl No2MB mov dx,01ceh ; get old value of ATI2E mov al,0aeh out dx,al inc dx in al,dx and al,0f0h or al,05 out dx,al ; set read/write-bank to 2.MB mov ax,cx int 10h ; switch to graphicsmode second time ; to clear 2.MB mov dx,01ceh ; get old value of ATI2E mov al,0aeh out dx,al inc dx in al,dx and al,0f0h out dx,al ; set read/write-bank to 1.MB No2MB: mov dx,52eeh in ax,dx and ax,007fh mov cl,7 shl ax,cl add ax,0c000h mov ATI_hi,ax mov ax,0064h mov ATI_lo,ax ; get Rom-Entry-Point ; select colordepth mov cl,byte ptr [di+6] test cl,80h jz No_888 mov ah,07h ; 888 mov bx,GRD_24_PLANES push bx jmp SelRes No_888: test cl,10h jz No_565 mov ah,0dh ; 565 mov bx,GRD_16_R_PLANES push bx jmp SelRes No_565: mov ah,05h ; 555 mov bx,GRD_16_PLANES push bx ; select resolution SelRes: and cl,6fh cmp cl,62h jnz No640 mov al,21h ; 640x480 jmp SetRes No640: cmp cl,63h jnz No800 mov al,01h ; 800x600 jmp SetRes No800: mov al,41h ; 1024x768 SetRes: mov bx,3 call dword ptr [ATI_lo] ; set resolution and colordepth mov ax,0068h mov ATI_lo,ax mov ax,1 call dword ptr [ATI_lo] ; initialize video mode mov dx,5eeeh ; mov al,02h ; enable memory-aperture mov al,00h ; disable memory-aperture ; mov ah,09h ; memory aperture at MB 9 out dx,ax mov ax,word ptr [di] shr ax,3 mov dx,26eeh out dx,ax mov dx,76eeh out dx,ax mov ATI_Accell,1 pop bx ; driver mode word ; mov bx,GRD_16_PLANES ; comment out to use with disp180 or bx,mode_W mov ax,0 ret ATI_setup endp ; switch ATI to SVGA-compatilbe mode ATI_DisableAccell proc near mov dx,52eeh in ax,dx and ax,007fh mov cl,7 shl ax,cl add ax,0c000h mov ATI_hi,ax mov ax,0064h mov ATI_lo,ax mov ax,0 mov bx,3 call dword ptr [ATI_lo] mov ax,0068h mov ATI_lo,ax mov ax,0 call dword ptr [ATI_lo] mov dx,5eeeh mov ax,0900h ; memory aperture disabled out dx,ax mov dx,01ceh ; get old value of ATI2E mov al,0aeh out dx,al inc dx in al,dx and al,0f0h out dx,al ; set read/write-bank to 1.MB mov ax,1024 ; set screenwidth to 1024 (original value) shr ax,3 mov dx,26eeh out dx,ax mov dx,76eeh out dx,ax mov ATI_Accell,0 ret ATI_DisableAccell endp ;-------------------------------------------------------------------------- ; DRIVER INIT ROUTINE ; called once after the driver is loaded ; may do one or more of the followings: ; - check for proper board type ; - check amount of RAM on board, and: ; -- update word in header to reflect correct amount ; -- disable modes in the tables for which there is not enough RAM ; - check for special equipment (HiColor DAC, etc...) ; ; Entry: nothing ; ; Exit: AX=status: ; non-zero: OK, ; 0: something went wrong (e.g. wrong adapter, etc..) ; BX,CX,DX may be trashed ; ; NOTE: This runs in real mode, but don't mess with the segment registers. ;-------------------------------------------------------------------------- driver_init_routine proc far mov ax,1 ret driver_init_routine endp ;-------------------------------------------------------------------------- ; MODE SET ROUTINE ; sets up a text or graphics mode as close as possible to the one ; reguested by the user with regard to number of colors and size. ; ; Entry: AX=mode selection ; 0 = 80x25 text ; 1 = default text ; 2 = text CX cols by DX rows ; 3 = biggest text ; 4 = 320x200 graphics ; 5 = default graphics ; 6 = graphics CX width by DX height ; 7 = biggest non-interlaced graphics ; 8 = biggest graphics ; 9 = graphics BX colors, CX width by DX height ; ; Exit: BX=driver mode flag ; CX=width (in pixels or characters) ; DX=height ; ; NOTE: This runs in real mode, but don't mess with the segment registers. ; YOU SHOULD NOT NEED TO CHANGE THIS ROUTINE AS IT IS PRETTY ; MUCH TABLE DRIVEN ;-------------------------------------------------------------------------- mode_set_routine proc far push ds push di push si mov si,cs mov ds,si cmp ax,9 jbe DoIt jmp Exit DoIt: add ax,ax mov si,ax jmp WORD PTR mode_set_table[si] mode_set_table label word dw offset mode_0 dw offset mode_1 dw offset mode_2 dw offset mode_3 dw offset mode_4 dw offset mode_5 dw offset mode_6 dw offset mode_7 dw offset mode_8 dw offset mode_9 mode_0: mov si,offset text_mode_table ; 80x25 text mov bx,def_nc mov cx,80 mov dx,25 jmp Lookup mode_1: mov si,offset text_mode_table ; default text mov bx,def_nc mov cx,def_tw mov dx,def_th jmp Lookup mode_2: mov si,offset text_mode_table ; CX*DX text mov bx,def_nc jmp Lookup mode_3: mov si,offset text_mode_table ; biggest text mov bx,def_nc mov cx,Max_TW mov dx,Max_TH jmp Lookup mode_4: mov si,offset graphics_mode_table ; 320x200 graphics mov bx,def_nc mov cx,320 mov dx,200 jmp Lookup mode_5: mov si,offset graphics_mode_table ; default graphics mov bx,def_nc mov cx,def_gw mov dx,def_gh jmp Lookup mode_6: mov si,offset graphics_mode_table ; CX*DX graphics mov bx,def_nc jmp Lookup mode_7: mov si,offset graphics_mode_table ; biggest non-interlaced gr mov bx,def_nc mov cx,Max_GWn mov dx,Max_GHn jmp Lookup mode_8: mov si,offset graphics_mode_table ; biggest graphics mov bx,def_nc mov cx,Max_GW mov dx,Max_GH jmp Lookup mode_9: mov si,offset graphics_mode_table ; CX*DX graphics w/ BX colors ; ; At this point: ; SI points to the table to search (text or graphics) ; BX has colors ; CX has width ; DX has height ; Lookup: xor ax,ax ; last color number seen Find_C: cmp [si+4],ax ; last color number == this? je Same_C jb Prev_C ; end of table -- use last color cmp BYTE PTR [si+6],0ffh ; valid entry ? je Prev_C ; not -- use last color mov ax,[si+4] ; record color number mov di,si ; start of entries w/ this color cmp ax,bx ; enough colors ? jae Find_S Same_C: add si,8 jmp Find_C Prev_C: or ax,ax ; found any color at all? je Exit ; ; At this point: ; DI points into the table to the first entry with the desired color ; number (either it has enough colors or it is the highest color ; number supported by the driver). Additionally, at least the ; first (= smallest size) entry for this color is valid (has a ; valid BIOS number). ; AX has the color number adjusted for the driver ; CX has width ; DX has height ; Find_S: cmp [di+4],ax ; still the same color #? jne Prev_S cmp BYTE PTR [di+6],0ffh ; valid entry ? je Prev_S cmp [di],cx jb Next_S cmp [di+2],dx jae GotIt Next_S: add di,8 jmp Find_S Prev_S: sub di,8 ; ; At this point: ; DI points to the table entry we want to set up ; GotIt: mov ax,[di+6] ; BIOS mode number or ah,ah ; special ? je doBIOS mov al,ah xor ah,ah dec ax add ax,ax mov si,ax call WORD PTR special_setup_table[si] jmp RetVal doBIOS: ;--------------- changed because AccellChip must be disabled if not used push ax mov al,ATI_Accell cmp al,0 jz NoATI call ATI_DisableAccell NoATI: pop ax ;--------------- change end int 10h mov bx,GRD_1_PLANE cmp WORD PTR [di+4],2 ; 2 colors ? je doFLAG mov bx,GRD_4_PLANES cmp WORD PTR [di+4],16 ; 16 colors ? je doFLAG mov bx,GRD_8_PLANES cmp WORD PTR [di+4],256 ; 256 colors ? je doFLAG mov bx,GRD_16_PLANES cmp WORD PTR [di+4],32768 ; 32K colors ? je doFLAG mov bx,GRD_PLANE_MASK ; something is wrong!! doFLAG: or bx,mode_W RetVal: mov cx,[di] mov dx,[di+2] Exit: pop si pop di pop ds ret mode_set_routine endp ;-------------------------------------------------------------------------- ; PAGING ROUTINE ; ; Entry: AH=read page ; AL=write page ; ; Exit: VGA configured. ; AX,BX,CX,DX,SI,DI may be trashed ; ; NOTE: This runs in protected mode! Don't mess with the segment registers! ; This code must be relocatable and may not reference any data! ;-------------------------------------------------------------------------- assume ds:nothing, es:nothing paging_routine proc far mov bx,ax ; save ax; ; can't speed up by using only 1MB for SVGA-modes because test itself ; would be to slow (data referenze not possible) ; set bits 4 and 5 of read/write bank to access 2.-4. MB and al,30h shr al,4 and ah,30h shr ah,2 or ah,al ; combine Read and Write-Planes cmp ah,0 mov dx,01ceh ; get old value of ATI2E mov al,0aeh out dx,al inc dx in al,dx and al,0f0h or al,ah out dx,al ; write new value and bh,0fh ; Read-plane on bits 0-3 mov ah,bh shr ah,3 ; move bit 3 to bit 0; shl bh,5 ; move bits 0-2 to 5-7; or ah,bh and bl,0fh ; Write-plane on bits 0-3 shl bl,1 or ah,bl ; Combine Read and Write plane mov dx,01ceh ; ATI register mov al,0b2h ; plane select out dx,ax ret paging_routine endp cseg ends end